DOI: 10.30857/2786-5371.2025.5
PUBLISHED: 22.10.2025
TABLE OF CONTENTS
 |
Antonenko A., Golubenko O., Onysko A., Chechyk S., Vostrikov S. Prospects of using AI for automated software testing https://doi.org/10.30857/2786-5371.2025.5.1 |
9 |
|
Zavhorodnia H., Zavhorodnii V., Tkachenko O., Savchenko A. Methodology for developing an adaptive content generation system https://doi.org/10.30857/2786-5371.2025.5.2 |
21 |
|
Koshel O., Panasyuk I. Determination of the absolute linear acceleration of a point in the working chamber of the spatial mechanism of a tumbling machine https://doi.org/10.30857/2786-5371.2025.5.3 |
31 |
|
Loienko M., Novak D., Sukalo M., Lebedenko Yu. Automation of the chewing gum production process https://doi.org/10.30857/2786-5371.2025.5.4 |
39 |
|
Pylypenko V., Skidan V., Volivach A., Mytelska O., Aftandilyants V. Reinforcement learning for autonomous navigation of robotic platforms under uncertainty: Domain Randomization and Sim-to-Real transfer https://doi.org/10.30857/2786-5371.2025.5.5 |
57 |
|
Savka M., Pilinsky V. Adaptive energy-oriented hardware and software system for cryptographic protection of internet of things fog nodes based on fuzzy logic https://doi.org/10.30857/2786-5371.2025.5.6 |
73 |
|
Statsenko V., Bondarenko A. Adaptive continual learning for intrusion detection systems: entropy-based memory management and dynamic threshold calibration https://doi.org/10.30857/2786-5371.2025.5.7 |
91 |
|
Danylkovych A., Okhmat O. Optimization of the retanning process of chrome semifinished leather using alkylcarboxyethanolamine https://doi.org/10.30857/2786-5371.2025.5.8 |
100 |
|
Rozvora L., Slieptsov O., Savchenko B., Sova N., Savchuk B. Determination of the influence of the filler introduction method on the properties of polyethylene films https://doi.org/10.30857/2786-5371.2025.5.9 |
112 |